(847) 564-4880

.(JavaScript must be enabled to view this email address)

Blog

Residential Interior Painting

Sunday, September 19, 2010

Residential Interior Painting

Residential Interior Painting- Solutions to Your Painting Problems

Residential painting may come with a myriad of problems. Some of which may happen to a newly painted surface, while some develop over time. The best way to deal with these problems is to prevent them before the painting even starts. Here are the common problems in residential interior painting, and what can be done to prevent or correct them.

Blocking

A common problem that occurs with painting is “blocking”. This is when two surfaces that are painted end up adjacent to each other. A great example for this would be a painted doorjamb sticking to the painted door. The reason why this happens is because not enough time was given for the paint to completely dry. Experienced residential contractors would ensure that the two surfaces do not stick until the paint is totally dry. They will also use high grade gloss or semi gloss paint that would dry fast. Low grade latex paint do not have enough resistance to prevent the blocking from happening.

Burnishing

Burnishing occurs when there is too much brushing or rubbing against the freshly painted surface. This constant brushing and rubbing will create a gloss or sheen to appear. If the paint used does not have scrub or stain resistance, then burnishing will take place immediately.

Residential interior painting for areas like window sills, trim and doors require a higher grade of latex in order to endure repetitive use and cleaning. Because traffic cannot be avoided, it is best that spots that always encounter movement should be painted with a gloss or semi-gloss instead of flat paint. These paints are easily cleaned by just a sponge of soft cloth. You simply need to rinse it with water, and the burnishing problem can be avoided.

Sagging

An immediate problem when it comes to residential interior painting is sagging. Sagging refers to a painting problem wherein there are drooping and uneven coats of paint. Several factors are responsible for creating this problem. One possible reason could be an uneven coat of paint, perhaps thinned out too much, or too thick paint was used. Applying paint with the use of a spray gun and painting it too close to the surface is another cause for sagging. The weather could also cause paint to drop. Humid or cold conditions are major problems for many residential commercial painting contractors.

In order to avoid this problem, exterior residential painting experts would reroll surfaces while the paint is still wet. It is quite difficult to do this if you are a beginner, as this should be done at an idea. Time. If it is too late, you could create a sandy effect.

There are certain times when doing painting projects yourself is beneficial. However, for areas with cold temperatures, or if you have no experience at all, it is best to get a residential painting service instead of doing it themselves.