Sunday, May 08, 2011
Perfect Painting Methods to Painting Exterior Brick Walls in Kenilworth
There are many different parts of a house which need painting such as painting exterior brick walls in Kenilworth. For the best protective and decorative value, each must be considered separately. We have developed specialized paint systems to help you achieve professional, long-lasting results for a fraction of the cost. For:
Masonry includes bricks, bagged brickwork, concrete blocks and cement render of all types. These surfaces are usually dusty and grimy. They are porous and often the mortar joints break up. Previously painted surfaces might show signs of chalking, where paint powder comes off when you rub it. Mould and algae grow on masonry which is shaded from sun and kept damp and cold. This problem should be remedied before painting. Use a Low Sheen or Gloss, weather-resistant, acrylic paint.
There is often no need to pay for an expensive new roof just because the old one is showing its age. With the right paint, you can make it look new. After treating for rust, choose the finish most suitable to your situation. Use a water-based, roof and structure, acrylic paint.
Where softwoods such as Oregon are used, pergolas must be painted for protection. But even if the timver is hardwood or treated pine, a paint finish enhances its looks. A Low Sheen or Gloss, weather-resistant, acrylic paint that is specially formulated for timber is recommended.
Ready-to-paint plasterboard has two surfaces, lining paper and jointing compound. Both must be sealed so that your finish paper won’t be absorbed into the surface and come out blotchy. Use an acrylic sealer for undercoat and a Low Sheen or Flat, acrylic paint. There are no unusual problems with repainting plasterboard. However, holes and other surface damage must be repaired and the filler sealed as for new plasterboard.
Unless decking boards are painted as soon as they are fixed in place, the surface will age and turn grey. The greyness represents ageing, which won’t hold paint for very long. If the boards are already grey, sand-off the surface before painting. Priming will improve durability. Use a paint that is specially formulated for decking.
Posted on 05/08 at 11:57 AM